Working with electricity can be deadly especially if you do not know how to fix a power socket. The dangers associated with working with electrical current is high. Many people die due to the lack of knowledge about how to work with electricity so here are a few tips if you are working with power:
Always switch off the main power
If you are working with high power, you must understand the hazards involved. If you are not careful you risk electrocution or dying on the spot. You must always off the main power socket before you begin your work and even most experienced electricians have faced blunders on the job.
Think of the project at hand
Are you experienced enough to handle the project and are you accustomed to working with electrical meters? If you are unsure of how you should work in a particular project always opt out of it. You must focus on enrolling yourself in various electrical apprenticeships to gain the necessary qualifications to work on big projects. Professionals know how to work with high voltages which are commercial and industrial in nature. Here are some details regarding construction apprentice on this website http://sesat.com.au/apprenticeships-and-traineeships/become/brisbane/. Understand the dangers involved
You must understand the dangers involved when working with electricity. Some projects like working with panels, meters and disconnects are more deadly than others. The necessary precautions must be taken like safety glasses, gloves, dust masks and rubber shoes to prevent electricity jolting through your body. Protect your hands from sharp objects like cables and tools. The extreme conditions can cause blisters. The goggles can protect your eyes and face from flying debris. The masks are used to keep the dust off of your lungs, while the ear plugs keep the ear drums protected from harsh sounds which can result in a loss of hearing.
Bring the appropriate testers
Most good electrical apprenticeships require extensive on the job learning about various electrical devices and provide the apprentice facts on how testers work too. Always test out the devices and panels before you begin working. You can do so by bringing a non-contact voltage tester device which can detect if the circuit is off or on even before you expose any wires. You must remove the wire and cover the overall device. In some testers you will have to press down a button for it to work so test the tester device on a lamp or bulb before you use it.
Remember to use the appropriate devices when working with electricity in order to avoid electrocution and death. Most people do not understand that you must not work with electricity during thunder or lightening, as you are more susceptible to getting electrocuted. Think of the weather conditions too before you begin any project!